Rail wagons

Rail wagons rented to GTS

Being GTS transport intermodal, wagons are all of the S type (special type of platform wagons) and they are suitable to transport containers and swap bodies.

Il tipico carro utilizzato è il Sggmrss con le seguenti caratteristiche:

Details >

• Sggmrss (xx xx 4961 xxx-x): 6-axle hinged container wagon with a 90′ load, meeting the main requirements set by STI WAG for the cross-europe conventional railway system network and by the General Agreement for the use of wagons (AVV/CGU/CUU). It complies with the construction laws for international circulation, and it can roll in any load condition:

– ferryboat ramps with a 1°30’tilt angle and 120 m curvature radius
– tracks with a 75 m curvature radius, minimum
– humps with switching, only accompanied by a traction medium.

• The wagon can run individually or combined with other wagons, and it is designed to run on regular gauge tracks (1435 mm) with maximum axle weigth of 22,5t in “s regime” and 20t in “ss regime”, at environmental temperatures going from -25 ° C to +45 ° C.

• The wagon has the MB UIC 596-6 code with C identification mark.

• The wagon enables the transport of homogenous or mixed arrangement loads, on the whole length of the wagon, with a 2x13820mm load surface:

– big dimensions containers, 20′, 30′, 40′ e 45′ long and 8′ e 8 ½’ high, according to the Fiche UIC 592-2, without exceeding the international dimensions;
– swap bodies 1, 2, 3, 3 bis and 4 type, 13,6 m high maximum, in compliance with UIC 592-4;
– casse mobili con contrassegno C secondo la Fiche UIC 596-6.

• The wagon form, according to STI WAG and UIC 505-1, is G1 type and has the following dimensions:

– Length, with not compressed buffers: 29590 mm;
– Bogies axle base: 2 x 12 025 mm;
– Wagon width: 3060 mm;
– Height of the buffer axle from the p.d.f: 1025 mm;
– Height of the towing attachment axle from the p.d.f: 1005 mm;
– Buffers axle base: 1750 mm;
– Load heigth: 1155 mm;
– Load width: 2600 mm;
– Minimum curvature radius – single wagon: 75 m
– Minimum curve radius – wagons composition: 150 m
– Maximum angle of a ferryboat entrance: 1 ° 30 ‘/ R = 120m

• Bogie of Y25 type:

– Axle base: 1800 mm
– Wheel diameter, originally 920 mm
– Bogie mass, about 4700 kg
– Brake system 2 x KE-GP-A
– Control valve KERdv + KE2dv
– Weighing valve WM10
– Brake block actuators DRV2A-450-H
– Brake cylinder 10″
– Maximum operating gradient of the service brake with loaded wagon: 2,6%
– The service brake is applied from the track level, on the A semi-wagon side. 
– Towing attachment 850 kN
– Traction group SCHWAB RG 20
– Buffer SCHWAB run 105 mm A category

• Dead weigth: 29,0 t

• Number of axles: 6 (3 bogies with 2 axles)

• Load capacity: 106,0 t

• Gross weight: 135,0 t

• Maximum axle load: 22,5 t

• Inertial maximum weight: 108t (72t/36t).